LOCKING SYSTEMS

TIE ROD SYSTEM

TIE ROD SYSTEM accessories are produced from heavy duty materials to meet higher strength requirements arising from thicker walls in construction of bridges, tunnels and other mega-structures. K.U.S is a major supplier of Tie Rod System accessories, due to our strict product quality control and the ability to maintain ample inventory.

D FORM TIE SYSTEM

D FORM TIE SYSTEM is widely used in the construction industry, due to its fast and easy assembly and removal of the need for temporary formwork. The system prevents breakage in the formwork and thus keeps concrete structures in good shape. It also saves construction costs, as all parts are reusable except for the separator (inner unit) which is cast into the concrete structures.

B FORM TIE SYSTEM

B FORM TIE SYSTEM is widely used in the construction industry, due to its fast and easy assembly and removal of the need for temporary formwork. The system prevents breakage in the formwork and thus keeps concrete structures in good shape. It also saves construction costs, as all parts are reusable except for the separator (inner unit) which is cast into the concrete structures.

FLAT TIE & WEDGE SYSTEM

FLAT TIE AND WEDGE PIN are used as a tying system in aluminium integrated panel formwork. K.U.S Flat Ties are manufactured to meet the requirements of different systems. They are made of hot-rolled steel.

Flat ties are used to hold wall columns and beam panels in place by securing with wedge and pin. Wedge systems pass through the pre-determined holes on external sides of panels and the hole on the flat tie. Thickness of these structural elements will be precisely controlled by the pre-fabricated flat ties. K.U.S Flat Ties are available for standard wall thickness as well for customised thickness according to customer requirements.

FORMWORK & TENSIONER CLAMP

FORMWORK CLAMP is the most efficient and reliable means for anchoring and locking formwork during concrete casting. The system guarantees fast set-up and ultra-fast removal for formwork, making it extremely popular in the construction industry. The rod is gripped strongly by the wedge, made of very hard steel, with longitudinal grooves that grip the iron rod to prevent it from slipping. Formwork Clamps prevent structural failure in formwork and ensure perfectly straight castings.

INSTALLATION METHOD

After setting up the timber or steel formwork for concrete casting, screw iron rods through the formwork at proper intervals. Set a Formwork Clamp to one end of the rod, hitting the wedge head with a light hammer blow. Set a second clamp at the opposite end, locking it in position after stretching the bar with the Tensioner Clamp. Remove the tensioner and you are ready to move on to the next pair of clamps.

U CLIP

U CLIP is a galvanised carbon steel rod, bent to shape and specially designed to be used with metal formwork locking accessories commonly seen in the construction industry. It is simple to use and can be reused as often as required.