Scaffolding Accessories

CAT WALK installs within the scaffolding frame horizontally, to provide a working platform. It has non-skid surfaces to prevent slipping when working on the platform.

STEEL PLANK is designed to be installed within the scaffolding frame to serve as a working platform. It is incorporated with a non-skid surface to prevent slipping when working on the platform.

SCAFFOLDING STAIR allows access diagonally from lower to upper levels within the assembled scaffolding frames. They have a non-skid surface to prevent slipping while accessing the stairs.

MONKEY LADDER is designed to hook on the horizontal scaffolding member to allow access vertically from lower to upper level by climbing, usually on the sides of assembled frames or scaffolding.

STEEL PLANK CAP is welded to the end of steel planks for closure.

CLAMP COVER is used to cover a swivel or fixed clamp for safety purposes.

PIPE CAP (also called as end cap) is used for covering the pipe ends for safety purposes.

RUBBER CAP is designed so it will not come off easily, and is a health and safety addition designed to prevent debris entering the scaffolding tube and falling out later.

SAFETY NET is temporarily installed vertically at the perimeter of scaffolding systems to protect from falling debris.

JAPAN HEAVY DUTY NET is temporarily installed vertically at the perimeter of scaffolding systems to protect from falling debris.

ORANGE FENCING provides excellent traffic control for work zone and hazardous areas. It is a perfect choice for temporary use at construction sites for blocking human traffic in the work zone.

SOUND BARRIER is designed to be used as an external sound reduction barrier on the boundary of construction sites.

G.I WIRE is manufactured from low carbon steel through drawing and electro galvanising. It is commonly used in the construction industry to achieve secure binding requirements.

CASTOR WHEEL is designed to be used with a rolling tower scaffold. It provides easy movement of the system and is usually used around the perimeter of the building.

PU CASTOR WHEEL is nonmarking and non-conductive. It is suitable for wet and corrosive applications.

CANTILEVER BRACKET is designed to support the cantilever load and to support the scaffold when it is erected on it, where it is impractical or undesirable to base the scaffold on ground.

WALL TIE is used to connect the scaffolding to the building structure using I-bolts and nuts, preventing movement towards or away from the building.

I-BOLT AND NUT is installed in the building structure to transfer the forces between the tie and the building structure.